Search results
1 – 5 of 5Mehdi Bidabadi, Sadegh Sadeghi, Pedram Panahifar, Davood Toghraie and Alireza Rahbari
This study aims to present a basic mathematical model for investigating the structure of counter-flow non-premixed laminar flames propagating through uniformly-distributed organic…
Abstract
Purpose
This study aims to present a basic mathematical model for investigating the structure of counter-flow non-premixed laminar flames propagating through uniformly-distributed organic fuel particles considering preheat, drying, vaporization, reaction and oxidizer zones.
Design/methodology/approach
Lycopodium particles and air are taken as biofuel and oxidizer, respectively. Dimensionalized and non-dimensionalized forms of mass and energy conservation equations are derived for each zone taking into account proper boundary and jump conditions. Subsequently, to solve the governing equations, an asymptotic method is used. For validation purpose, results achieved from the present analysis are compared with reliable data reported in the literature under certain conditions.
Findings
With regard to the comparisons, although different complex non-homogeneous differential equations are solved in this paper, acceptable agreements are observed. Finally, the impacts of significant parameters including fuel and oxidizer Lewis numbers, equivalence ratio, mass particle concentration, fuel and oxidizer mass fractions and lycopodium initial temperature on the flame temperature, flame front position and flow strain rate are elaborately explained.
Originality/value
An asymptotic method for mathematical modeling of counter-flow non-premixed multi-zone laminar flames propagating through lycopodium particles.
Details
Keywords
Hesam Bakhshi, Erfan Khodabandeh, Omidali Akbari, Davood Toghraie, Mohammad Joshaghani and Alireza Rahbari
In the present study, laminar steady flow of nanofluid through a trapezoidal channel is studied by using of finite volume method. The main aim of this paper is to study the effect…
Abstract
Purpose
In the present study, laminar steady flow of nanofluid through a trapezoidal channel is studied by using of finite volume method. The main aim of this paper is to study the effect of changes in geometric parameters, including internal and external dimensions on the behavior of heat transfer and fluid flow. For each parameter, an optimum ratio will be presented.
Design/methodology/approach
The results showed that in a channel cell, changing any geometric parameter may affect the temperature and flow field, even though the volume of the channel is kept constant. For a relatively small hydraulic diameter, microchannels with different angles have a similar dimensionless heat flux, while channels with bigger dimensions show various values of dimensionless heat flux. By increasing the angles of trapezoidal microchannels, dimensionless heat flux per unit of volume increases. As a result, the maximum and minimum heat transfer rate occurs in a trapezoidal microchannel with 75° and 30 internal’s, respectively. In the study of dimensionless heat flux rate with hydraulic diameter variations, an optimum hydraulic diameter (Dh) was observed in which the heat transfer rate per unit volume attains maximum value.
Findings
This optimum state is predicted to happen at a side angle of 75° and hydraulic diameter of 290 µm. In addition, in trapezoidal microchannel with higher aspect ratio, dimensionless heat flux rate is lower. Changing side angles of the channels and pressure drop have the same effect on pressure drop. For a constant pressure drop, if changing the side angles causes an increase in the rectangular area of the channel cross-section and the effect of the sides are not felt by the fluid, then the dimensionless heat flux will increase. By increasing the internal aspect ratio (t_2/t_3), the amount of t_3 decreases, and consequently, the conduction resistance of the hot surface decreases.
Originality/value
The effects of geometry of the microchannel, including internal and external dimensions on the behavior of heat transfer and fluid flow for pressure ranges between 2 and 8 kPa.
Details
Keywords
Misagh Rahbari, Alireza Arshadi Khamseh and Yaser Sadati-Keneti
The Russia–Ukraine war has disrupted the wheat supply worldwide. Given that wheat is one of the most important agri-food products in the world, it is necessary to pay attention to…
Abstract
Purpose
The Russia–Ukraine war has disrupted the wheat supply worldwide. Given that wheat is one of the most important agri-food products in the world, it is necessary to pay attention to the wheat supply chain during the global crises. The use of resilience strategies is one of the solutions to face the supply chain disruptions. In addition, there is a possibility of multiple crises occurring in global societies simultaneously.
Design/methodology/approach
In this research, the resilience strategies of backup suppliers (BS) and inventory pre-prepositioning (IP) were discussed in order to cope with the wheat supply chain disruptions. Furthermore, the p-Robust Scenario-based Stochastic Programming (PRSSP) approach was used to optimize the wheat supply chain under conditions of disruptions from two perspectives, feasibility and optimality.
Findings
After implementing the problem of a real case in Iran, the results showed that the use of resilience strategy reduced costs by 9.33%. It was also found that if resilience strategies were used, system's flexibility and decision-making power increased. Besides, the results indicated that if resilience strategies were used and another crisis like the COVID-19 pandemic occurred, supply chain costs would increase less than when resilience strategies were not used.
Originality/value
In this study, the design of the wheat supply chain was discussed according to the wheat supply disruptions due to the Russia–Ukraine war and its implementation on a real case. In the following, various resilience strategies were used to cope with the wheat supply chain disruptions. Finally, the effect of the COVID-19 pandemic on the wheat supply chain in the conditions of disruptions caused by the Russia–Ukraine war was investigated.
Details
Keywords
Hamed Jafari, Mohammad Goharkhah and Alireza Mahdavi Nejad
This paper aims to analyze the accuracy of the single and two-phase numerical methods for calculation of ferrofluid convective heat transfer in the presence of a magnetic field…
Abstract
Purpose
This paper aims to analyze the accuracy of the single and two-phase numerical methods for calculation of ferrofluid convective heat transfer in the presence of a magnetic field. The findings of current study are compared with previous single-phase numerical results and experimental data. Accordingly, the effect of various parameters including nanoparticles concentration, Reynolds number and magnetic field strength on the performance of the single and two-phase models are evaluated.
Design/methodology/approach
A two-phase mixture numerical study is carried out to investigate the influence of four U-shaped electromagnets on the hydrodynamic and thermal characteristics of Fe3O4/Water ferrofluid flowing inside a heated channel.
Findings
It is observed that the applied external magnetic field signifies the convective heat transfer from the channel surface, despite local reduction at a few locations. The maximum heat transfer enhancement is predicted as 23% and 25% using single and two-phase models, respectively. The difference between the results of the two models is mainly attributed to the slip velocity effect which is accounted for in the two-phase model. The magnetic field gradient leads to a significant increase in the slip velocity which in turn causes a slight difference in velocity and temperature profiles obtained by the single and two-phase models in the magnetic field region. According to percentage error calculation, the two-phase method is generally more accurate than the single-phase method. However, the percentage error of both models improves by decreasing either magnetic field intensity or Reynolds number.
Originality/value
For the first time in the literature, to the best of the authors’ knowledge, the current work analyzes the accuracy of the single and two phase numerical methods for calculation of ferrofluid convective heat transfer in the presence of a magnetic field.
Details
Keywords
Erfan Khodabandeh, Davood Toghraie, A. Chamkha, Ramin Mashayekhi, Omidali Akbari and Seyed Alireza Rozati
Increasing heat transfer rate in spiral heat exchangers is possible by using conventional methods such as increasing number of fluid passes and counter flowing. In addition, newer…
Abstract
Purpose
Increasing heat transfer rate in spiral heat exchangers is possible by using conventional methods such as increasing number of fluid passes and counter flowing. In addition, newer ideas such as using pillows as baffles in the path of cold and hot fluids and using nanofluids can increase heat transfer rate. The purpose of this study is to simulate turbulent flow and heat transfer of two-phase water-silver nanofluid with 0-6 Vol.% nanoparticle concentration in a 180° path of spiral heat exchanger with elliptic pillows.
Design/methodology/approach
In this simulation, the finite volume method and two-phase mixture model are used. The walls are subjected to constant heat flux of q″ = 150,000 Wm−2. The inlet fluid enters curves path of spiral heat exchanger with uniform temperature Tin = 300 K. After flowing past the pillows and traversing the curved route, the working fluid exchanges heat with hot walls and then exits from the section. In this study, the effect of radiation is disregarded because of low temperature range. Also, temperature jump and velocity slipping are disregarded. The effects of thermophoresis and turbulent diffusion on nanofluid heat transfer are disregarded. By using finite volume method and two-phase mixture model, simulations are performed.
Findings
The results show that the flow and heat transfer characteristics are dependent on the height of pillows, nanoparticle concentration and Reynolds number. Increasing Reynolds number, nanoparticle concentration and pillow height causes an increase in Nusselt number, pressure drop and pumping power.
Originality/value
Turbulent flow and heat transfer of two-phase water-silver nanofluid of 0-6 per cent volume fraction in a 180° path of spiral heat exchanger with elliptic pillows is simulated.
Details